AS SEEN ON
Don’t Just Wait for a Beep. See What’s in Your Air with the 4-in-1 CO & Gas Detector
"I Finally Know What the Detector Is Actually Reading! We already had a traditional CO alarm, but I wanted something that actually showed us a reading instead of just a green light. I like being able to glance at the screen and see the CO level, gas status, temperature, and humidity without checking an app."
More Than a Status Light.
REAL-TIME DISPLAY: See Readings at a Glance
SELF-TEST BUTTON: Check Device Operation
LOW-POWER DESIGN: ≤2W Static Power
STATUS INDICATORS: Power + Fault + Alarm
Happy Customers
Why Homeowners Add Real-Time Monitoring.
“I like that I can glance at the screen and see the actual CO reading instead of wondering what a green light means. The gas, temperature, and humidity readings are a nice bonus too.”
“We have a gas stove, furnace, and water heater, so I wanted something that gave us more information in one place. Being able to monitor both CO and combustible gas makes this much more useful for our home.”
“I bought this before winter because our furnace runs almost constantly once it gets cold. I like being able to check the CO number on the screen whenever I walk by instead of waiting for an alarm.”
“With kids in the house, I’m always checking doors, the stove, and everything else before bed. Now I can glance at this too and quickly see the readings without opening an app or pressing through a bunch of settings.”
“I originally ordered one for our house, then bought another for my parents. The display is easy to read, and I like that they can check the numbers directly instead of relying on a phone app.”
“We rent, so I didn’t want anything that needed drilling or electrical work. I plugged it into the outlet, followed the setup instructions, and it was simple to add to our existing home-safety setup.”
“We spend a lot of weekends traveling in our RV, so compact safety equipment matters. This takes up very little space, and I like having the readings visible instead of another device that only gives me an indicator light.”
“This is exactly what I wanted, no account to create, no Wi-Fi setup, and no notification app to keep checking. The information is right there on the screen whenever I want to look at it.”
“I mainly bought it for CO and gas monitoring, but I use the temperature and humidity readings more than I expected. It’s convenient having all four readings together on one screen.”
You Can’t See CO. Your Detector Can.
SEE THE CO LEVEL NOT JUST THE LIGHT
Know What the Monitor Is Reading.
The display shows measured carbon monoxide concentration in parts per million (PPM).
Instead of waiting solely for an alarm, you can glance at the screen and see the current reading.
✓ Live CO Reading
✓ PPM Display
✓ Digital Screen
✓ At-a-Glance Visibility
More Information in a Single Look.
MORE THAN CARBON MONOXIDE
Monitor Common Combustible Gases Too.
The gas channel displays combustible-gas concentration in %LEL.
Current product materials identify monitoring for common fuel gases including:
- NATURAL GAS
- METHANE
- PROPANE
- BUTANE
- COAL GAS
One Device. More Than One Gas Concern.
A WARNING SHOULD BE HARD TO MISS
See the Status. Hear the Alarm.
The detector combines an audible warning rated at ≥85 dB with dedicated indicator lights.
- GREEN - POWER: Shows operating power status.
- YELLOW - FAULT: Signals a detected device fault.
- RED - ALARM: Shows an active alarm condition.
- SELF-TEST: Lets you check device operation as directed.
Visual Status + Audible Warning.
PLUG IN. CHECK THE SCREEN. DONE.
Home Monitoring Without a Complicated Setup.
No electrician. No hardwiring. No app pairing. Plug the detector into a compatible outlet, follow the placement instructions, and use the on-device display to check current readings.
✓ Plug-In Setup
✓ No App Required
✓ No Hardwiring
✓ No Tools
Simple Setup for Everyday Monitoring.
Recommended by Experts
“Carbon monoxide cannot be seen or smelled, so dependable detection is an important part of home safety. A digital monitor can add useful real-time visibility by showing current readings, but it should be installed according to the manufacturer’s instructions and used alongside required, properly maintained CO alarms. CPSC recommends CO alarms on every level of a home and outside sleeping areas.”
An Extra Layer of Visibility for Different Kinds of Homes
Gas-Appliance Homes
Useful for households with fuel-burning furnaces, water heaters, fireplaces, ranges, or other gas-powered equipment.
Multi-Level Homes
Different floors can have different potential CO sources and airflow conditions.
Apartments & Rentals
Plug-in installation adds real-time monitoring without requiring wall modification or hardwiring.
RV & Road Trips
The compact design can fit into compatible travel setups where CO or fuel-gas monitoring is appropriate.
Vacation Homes
An easy-to-read monitor can add useful visibility in secondary homes or properties that may sit unused between visits.
Built for Real Homes not Another Complicated Smart Device.
The most useful monitor is one that is easy to install, easy to read, and easy to check as part of everyday life.
NO APP NEEDED
Read It Right on the Device: No account, phone pairing, Wi-Fi setup, or app dashboard is required for the core display and alarm functions.
ROTATING PLUG
Fits More Outlet Orientations: The rear plug rotates to help the detector sit properly in different compatible wall-outlet orientations.
COMPACT VERTICAL DESIGN
Monitoring Without the Bulk: The narrow body keeps the display visible while taking up relatively little wall space.
LOW EVERYDAY POWER USE
≤2W Static Consumption: Low static power consumption makes the plug-in model practical for ongoing household monitoring.
4-in-1 CO & Gas Detector
4-in-1 CO & Gas Detector
Limited Time: Claim Your 40% Off Today!
- See More Than Whether the Light Is Green.
Free & Fast Shipping: Reliable & Trusted Shipping Carrier
- Easy Returns: Full refund or Replacement.
- 30-Day Returns: Try it in your real routine
- 90-Day Warranty: Added product protection
Couldn't load pickup availability
1. How is 4-in-1 CO & Gas Detector different from my current detector?
A traditional CO alarm may stay quiet until carbon monoxide reaches a defined alarm threshold and depending on the concentration, the alarm may not sound immediately. Until then, all you really know is that the alarm hasn’t gone off.
The 4-in-1 CO & Gas Detector gives you something different: a live CO reading starting from 0 PPM, displayed directly on the screen. Instead of only knowing “normal” or “alarm,” you can actually see the number change and monitor what the detector is sensing in real time. And CO is only part of the picture.
Most homes already have smoke and carbon-monoxide alarms, but a standard CO alarm is not designed to monitor unburned combustible gases such as methane or propane. This 4-in-1 detector monitors carbon monoxide and combustible gas while also displaying temperature and humidity.
Four readings. One screen. More visibility into what’s happening in your home.
2. How many detectors should I have?
For primary CO alarms, the CPSC recommends having coverage on every level of the home and outside sleeping areas.
For additional CO & gas monitors, the right number depends on your home’s size, floor plan, fuel-burning appliances, local requirements, and the placement instructions for the specific device.
As a practical starting point, many homes use at least one monitor per floor, with additional coverage near sleeping areas and other appropriate locations identified in the manufacturer’s instructions.
For example, a typical two-story home with a basement may use around four units to cover the basement, main floor, upper floor, and bedroom area. Smaller apartments may need fewer.
Always follow the exact placement guidance for CO and combustible-gas detection rather than placing a unit directly beside a gas appliance by default.
3. Where should I install it, and at what height?
Use the exact placement instructions supplied with your detector.
Carbon monoxide can mix throughout indoor air, but a combination unit also monitors combustible gases and different gases behave differently. That means the most convenient outlet is not automatically the best location.
For primary CO protection, CPSC recommends alarms on every level of the home and outside sleeping areas. Avoid putting an alarm where furniture or curtains can obstruct it.
Do not place the detector directly next to a stove, furnace, shower, or another source of heat, moisture, or combustion unless the manufacturer specifically instructs you to do so.
4. Will it go off every time I cook or take a hot shower?
It is designed to monitor carbon monoxide and combustible gas not smoke or steam.
However, that does not mean nuisance alarms are impossible. Cooking with gas appliances can produce real combustion gases, and an improperly placed detector may respond to conditions near the appliance. Proper placement matters.
If the alarm sounds or the gas reading rises unexpectedly, do not automatically assume it is a false alarm. Follow the product instructions, ventilate or leave the area when appropriate, and investigate the source safely.
5. How can I tell whether the detector is still working?
Use the device’s Self-Test function according to the instruction manual and regularly check the Power, Fault, and Alarm indicators.
The digital display is useful for showing current readings, but a number on the screen alone is not proof that the sensing element is accurately detecting CO or gas.
Follow the manufacturer’s recommended testing and replacement schedule. For primary CO alarms, CPSC recommends regular testing and purchasing units that meet the current UL 2034 safety standard.
6. Can I use it in an apartment, rental, RV, or cabin?
The plug-in design can make installation convenient in many locations because it does not require drilling or hardwiring.
For apartments and rentals, follow the product placement instructions and continue using any alarms required by your landlord or local building code.
For RVs and campers, use only equipment appropriate for that environment and follow RV-specific safety requirements. CPSC notes that CO alarms are available for recreational vehicles and should be used there.
Do not assume a household plug-in detector automatically replaces an RV-certified CO or propane alarm.
7. Is the 4-in-1 CO & Gas Detector the same as similar detectors sold under other names?
Many plug-in CO and combustible-gas detectors can look nearly identical while using different sensors, internal components, manufacturers, firmware, certifications, and alarm specifications.
Do not assume two products are identical simply because the housing or display looks the same.
Always verify the model number, manufacturer, safety certification, operating specifications, and instructions for the exact unit you purchased.
8. What does the 4-in-1 detector monitor?
It monitors four categories: Carbon monoxide, combustible gas, temperature, and relative humidity.
9. Why is it called 4-in-1?
Combustible gases are grouped into one monitoring category. The four displayed categories are:
- CO
- Combustible gas
- Temperature
- Humidity
10. Does it detect carbon monoxide?
Yes. The display shows measured CO concentration in PPM (parts per million).
11. What combustible gases does it monitor?
Current product materials identify common gases including natural gas, methane, propane, butane, and coal gas.
12. What does %LEL mean?
LEL means Lower Explosive Limit.
The %LEL reading indicates combustible-gas concentration relative to the concentration at which a gas-air mixture can become ignitable.
13. Does the display show readings continuously?
The device is designed to display current monitoring information directly on the screen while powered.
14. Does it show room temperature?
Yes. Temperature is displayed alongside the safety-monitoring readings.
15. Does it show humidity?
Yes. The screen displays relative humidity as RH%.
16. How loud is the alarm?
The product materials specify an audible alarm rated at ≥85 dB.
17. What do the indicator lights mean?
The device includes dedicated indicators for: Power + Fault + Alarm
18. Does it require an app?
No app is required for the core display and audible-alarm functions.
19. Does it require Wi-Fi?
No Wi-Fi connection is required for the current on-device monitoring functions.
20. Is it difficult to install?
The plug-in version requires no drilling or hardwiring.
Plug it into an appropriate compatible outlet and follow the included placement instructions.
21. Can the plug rotate?
Yes. The exact product imagery shows a freely rotating rear plug.
22. How much electricity does it use?
The plug-in product material lists static power consumption of ≤2W.
23. What comes in the package?
Your order includes:
- 1 × 4-in-1 CO & Gas Detector
- 1 × User Instruction Manual
- 1 × Product Box
The plug-in design requires no separate charging cable, mounting hardware, or remote control.
24. What is the return policy?
Eligible purchases may be returned within 30 days according to the applicable Return & Refund Policy.
25. What does the warranty cover?
Eligible manufacturing and functional defects are covered by the 90-day product warranty. See the warranty policy for complete terms.